| Module # : | GKA3000D | |||||||||
•(Click features to see more information)
.jpg)
UHF RFID parking access control system
System includes:
1. 2 barrier gates(built-in vehicle detector & loop wires) with 3 meter boom(could change to folding arm or fence arm)
2. 2 sets of 4-6 meters UHF RFID readers(FCC ISM 902-928MHz or ETSI 865.6-867.6MHz)
3. 1 parking control panel & software
4. Power supplies & RS232/RS485 converter
5. 100 Passive EPC G2 anti-tear off stickers(attached inside of the windscreen, note there should be no anti-sunshine film in front of the location of the sticker)
6. Software is English interface, and can be translated into any language upon request
Connections:
1. The parking controller connect with 4-6 meter reader via wiegand26
2. The parking controller connect with barrier gate via relay/switching signal
3. The parking controller connect with PC/Software via serial RS232
Operation process:
1. User drives the vehicle approaching the barrier gate( the tag/sticker attaches on windscreen or windshield rain wiper),
2. The UHF RFID reader detects the tag/sticker when it is in 4-6 meters range,
3. The barrier gate will be opened automatically,
4. The vehicle enters or exits,
5. All access history will be stored in database for later analysis.
Note: 1. The system can work with no PC by parking controller working in standalone mode.
2. Please make sure no anti-sunshine film(tint film) in front of the windscreen at the card location
Available functions(need to add hardware):
1. Plate Number picture capture
2. Parking ticket printer
3. Receipt ticket printer
4. Parking payment management
5. LED for due amount display & Full/available sign
Working environment:
1. Software is WIN XP, SQL2000 based,
2. Temperature: -35℃-75℃,
3. Power consumption:
220V 120W(Barrier gates), 12V 100W(RFID Reader), 12V 1A(Parking controller)
4. Warranty: 3 years
Package information:
1. 2 wooden cases for barrier gates, 105*40*40cm per unit, 65kg per unit,
2. 1 wooden case for boom of barrier gate, 310*10*10cm, 6kg,
3. 2 cartons for UHF RFID readers & tags:
25*25*5cm, package weight:4.5kg, net weight:0.8kg,
4. 1 small box for parking control panel & software disc
Total dimension: less than 0.4cbm,
Total weight: 145kg,
This information is for shipment calculation.
We could ship the equipments worldwidely so please check the shipment method & cost with us via email: info@globalkeyaccess.com.
A picture from our finished project in Malaysia
Tips for using UHF RFID Parking Solution:
We have four types of tags for your purchase options
Standard Card/tag, Size: 86*54*1.0mm, Material: PVC, ABS optional
Sticker, Size options: 54*85.6, Material: paper, PI, Option: anti-tear off (self destroy)
Windshield wiper attached tag, Size:201(L)*12(W)*13 (H)mm, Material: ABS
.JPG)
Reader’s location diagram
Reader’s angle adjustment
Tag/sticker’s location on windscreen( with no anti-sunshine film )
Description:
1. The tag/sticker should be attached on the location close to the reader installed on lane,
2. For small vehicle( car ) use, location A, B, C is preferable,
3. For big vehicle( truck ) use, location D, E, F is preferable
Supplement:
For windscreen with anti-sunshine film,
1. For pre-attached windscreen film, there is a 120*70mm reserved cut for use of RFID tag at location B, tag/sticker could be attached here,
2. For after-attached windscreen film, user could require installer to make a cut ( 120*70mm ) at location A, B, C, D, E. F, and attach tag/stick here,
3. Or metal tag could be recommended, such as plate tag, or windshield wiper tag ( mounted on windshield wiper ),
4. Or manually show the tag/card to the reader as shown as picture below,
.JPG)
.JPG)
Correct Wrong
Make sure no anti-sunshine film on windscreen, buy card holder to hold the card and adhere the card holder on the windscreen
No Product found!
.gif){kind=small}