A picture from our finish project in China






The reader is 433MHz active RFID

Detecting distance up to 30 meters
Built-in infrared scanner, only being activated when 433MHz card entering into its detecting range
Could penetrate metal contained sunshine proof film( or metal plate which is transparent) on windscreen of vehicle
Easy to adjust detecting distance by reader being pan/tilt
Wiegand 26, Wiegand 34, RS485(active), RS485(passive) output

Hybrid tag

433MHz card could be combined with EM4100 compatible card, could transmit:

1. 433MHz card No. only,
2. EM4100 Card No. only,
3. 433MHz card No.+ EM4100 card No,

This is for the application which need separate identification of the driver and vehicle at the same time

Hybrid card’s purpose

Under the mode of transmission of 433MHz No.+ EM4100 card No. , driver could take out the EM4100 card when he get off the vehicle, so even someone want to drive the car but he can not drive to exit the parking lot because he doesn’t have the EM4100 card No. This mode could help system to identify when and who is driving which vehicle to pass through the barrier gate, the barrier gate will open/close automatically only when all the information is correct.






Features

1. Penetration, able to penetrate metal contained anti-sunshine film on vehicle, the active label could be decoded automatically without rolling down the vehicle window.
2. Direction, combined with infrared scanner, targeted direction, decoding only within 80° angle.
3. Auto adjustment, auto adjust parameters of signal sent from the card, adapt to various of environments.
4. Indoor and outdoor application optional.
5. Interference resistance, adopts DIP Address setup, CDMA technologies, no interference when no infrared scanning area being overlapped. 
6. Environment protection, 433MHz RFID reader has no electromagnetic radiation in stand by mode.
7. Stable reading range, no attenuation within reading area, from 3 to 30 meters
8. Compatibility, Wiegand 26, Wiegand 34, RS485(Active), RS485(Passive).
9. DIP switch, including communication type, vehicle detector, time lag of transmission of the card code, SN setup.
10. IP65 design.






When replacing the battery, place the bottom side upside, press battery clip on the left and take the  batteries out, put the new batteries with positive side upside into the slot and insert the battery clip as the picture above.

Specifications of  Active RFID reader

Reading distance: 3-30 Meters
Frequency: 433MHz
Temperature: -40℃-80℃
Humidity: 10-90%
Size: 25*25*7cm
Weight: 4.5kg